Products

• Easy to mount
• Protects from damage in the event of a fall

• Easy to mount
• Protects from damage in the event of a fall

• Anodized hub milled from a whole piece
• Maximum weight saving compared to standard wheels
• Maximum gain in handling and, at the same time, stability in challenging off-road situations
• Anodized aluminum spoke nipples

• Made of the highest quality materials
• Visual highlight
• Perfect fit
• Personalize the look of your motorcycle
• Race look
• Designed to completely change the original look of your motorcycle
• Glue the graphics kit directly onto the standard fairing parts
• Can be removed without leaving any residue

• Developed according to the requirements of our factory drivers
• Allows tighter fuel hose routing along the engine
• Prevents unintentional disconnection of the fuel hose in off-road applications

• Elegant anodized surface
• Visual highlight
• CNC milled aluminum triple clamp
• Optimally tuned steering stem stiffness
• 100% alignment of the fork tubes
• Ideal flexibility – precisely customized to the WP fork
• Specially optimized geometry of the fork clamping
• No ovalization of the fork outer tube
• Highly precise and smooth fork response
• Maximum handling gain
• Gain in stability at the front wheel
• Overall, more homogeneous force flows in the entire vehicle
• Simple offset adjustment
• Including steering stem with steering head bearing already pressed on
• Very simple offset adjustment of 20 or 22 mm
• Shorter offset: Stability on fast straights
• Longer offset: easier and quicker cornering in curves
• For use on Enduro MY21 and later (EU Version), the Factory fuel tank cap vent is required

• 100 mm length
• 20 blades: 0,05 - 0,1 - 0,15 - 0,2 - 0,25 - 0,3- 0,35 - 0,4 - 0,45 - 0,5 - 0,55 - 0,6 - 0,65 - 0,7 - 0,75 - 0,8 - 0,85 - 0,9 - 0,95 - 1,0 mm

• No fading
• Outer ring made of stainless high-performance brake steel
• Minimal wear on brake pads
• Significantly longer lasting
• With Flame design for added braking performance

• Significantly more torque
• Substantial weight saving
• Noticeable performance enhancement
• Silencer housing made of high-grade titanium
• Carbon silencer cap
• Mounting also possible with original header
• Blue anodized outer sleeve

• Tangible performance boost over the entire engine speed range
• Highest quality workmanship
• Manifold routing optimally adapted to the production engine
• Resonator chamber for optimum torque distribution and noise reduction
• Manufactured entirely from high-grade titanium

• Prevents abrasion of the frame by dirt, falls or the driver's boots
• Protects trousers and boots from burns on the exhaust side

Makes removal of the front wheel easier

For all front axles with a diameter of 22 mm

• CNC milled from high-strength aluminium
• Resistant to the toughest stresses and strains
• Uncompromising race look

• Provides better cooling of the engine
• Provides more air
• Maximum performance
• Digital control
• Current temperature can be read at any time
• Variable switch-on temperature between 65 °C and 95 °C
• Switch-off temperature 1 °C below the selected switch-on temperature

• Easy to mount
• Optimal protection against stone impact
• Provides maximum protection at the lowest possible weight
• Including adapted radiator protection grills

Suitable for the left and right side

Provides maximum protection at the lowest possible weight

Optimal protection against stone impact

Easy to mount

• For extremely muddy conditions
• Protects the radiator from mud, dirt and sand
• Protection against rapid overheating of the engine in muddy conditions

• Allows the rear wheel to be braked with the left hand
• Provides additional control in critical riding situations
• For use with the automatic clutch

• Lower compared to the standard seat
• Resistant coating
• Enables shorter drivers to also achieve the optimum seat height

• Easy to mount
• Protects the linkage from damage

• Easy to mount
• Made of high-quality carbon
• Maximum protection against falls, flying stones, branches, etc.
• Mounting material included in scope of supply
• Provides maximum protection at the lowest possible weight

Steering damper bracket

Steering damper counter bearing

• Protects from damage in the event of a fall
• Permanent protection against unattractive scratches and matte spots on the swingarm

SXS07125200 | PHDS PROGRESSIVE H-BAR DAMPING | Genuine GasGas Motorcycle Part | Fits: EC 250 2021,EC 250 2022,EC 250 2023,EC 250F 2021,EC 250F 2022,EC 250F 2023,EC 300 2021,EC 300 2022,EC 300 2023,EC 350F 2021,EC 350F 2022,EC 350F 2023,MC 125 2021,MC 125 2022,MC 125 2023,MC 250 2022,MC 250 2023,MC 250F 2021,MC 250F 2022,MC 250F 2023,MC 350F 2022,MC 350F 2023,MC 450F 2021,MC 450F 2022,MC 450F 2023,MC 450F TROY LEE DESIGNS 2022,MC 50 2021,MC 50 2022,MC 50 2023,MC 65 2021,MC 65 2022,MC 65 2023,MC 85 17/14 2022,MC 85 17/14 2023,MC 85 19/16 2021,MC 85 19/16 2022,MC 85 19/16 2023,MC-E 5 2021,MC-E 5 2022,MC-E 5 2023

SXS07125712 | BRAKE CALIPER REAR BREMBO | Genuine GasGas Motorcycle Part | Fits: MC 125 2021,MC 125 2022,MC 125 2023,MC 250 2022,MC 250 2023,MC 250F 2021,MC 250F 2022,MC 250F 2023,MC 350F 2022,MC 350F 2023,MC 450F 2021,MC 450F 2022,MC 450F 2023,MC 450F TROY LEE DESIGNS 2022

SXS09125512 | BRAKE CALIPER FRONT | Genuine GasGas Motorcycle Part | Fits: MC 125 2021,MC 125 2022,MC 125 2023,MC 250 2022,MC 250 2023,MC 250F 2021,MC 250F 2022,MC 250F 2023,MC 350F 2022,MC 350F 2023,MC 450F 2021,MC 450F 2022,MC 450F 2023,MC 450F TROY LEE DESIGNS 2022

STOP PLATE SEP.PISTON - T107S : genuine GasGas motorcycle part

DE-MOUNT.TOOL ADAPTER BUSHING - T120 : genuine GasGas motorcycle part

DIS-LASSEMBLY TOOL - T1204 : genuine GasGas motorcycle part

CALIBRATE AXLE D=18MM - T1205 : genuine GasGas motorcycle part

ASSEMBLY TOOL KGW - T1206 : genuine GasGas motorcycle part

DE-MOUNT.TOOL KGW SWIVEL BEAR. - T1207S : genuine GasGas motorcycle part

VENTILATION & FILLING DEVICE - T1240S : genuine GasGas motorcycle part