Air Filter Dust Protection

£14.42

Tax included. Shipping calculated at checkout.

Acts as an additional protective layer
Recommended for extremely dusty conditions
Premature sanding of the air filter is avoided
Coarse-pored air filter cover

Air Filter Water Protection

£12.61

Tax included. Shipping calculated at checkout.

Recommended in extremely wet conditions

Akrapovič "Slip-on Line" Silencer

£588.90

Tax included. Shipping calculated at checkout.

Significantly more torque
Significantly more performance
Extremely durable
Factory Racing Team look
Made from high grade titanium
Permanently welded brackets
Profiled surface of the outer sleeve
Embossed Akrapovič logo
Significantly longer durability
Complies with FIM regulations

Bleeder Valve

£14.42

Tax included. Shipping calculated at checkout.

Developed together with the vehicle
Specially developed for WP forks
Fork bleeding using finger pressure

Chainguide Bracket Protection

£71.63

Tax included. Shipping calculated at checkout.

Made of high-strength aluminium

Crash Bung

£36.20

Tax included. Shipping calculated at checkout.

Easy to mount
Protects from damage in the event of a fall

Crash Bung

£36.20

Tax included. Shipping calculated at checkout.

Easy to mount
Protects from damage in the event of a fall

Expansion Chamber Guard

£180.34

Tax included. Shipping calculated at checkout.

80 % lighter than steel with the same load-bearing capacity
Elegant look
Low thermal expansion
Made of high-quality carbon
High long-term temperature stability
Non-corrosive
Maximum protection against falls, flying stones, branches, etc.
Can only be fitted with a standard header
High stiffness and strength

Factory Front Wheel 1.6 x 21''

£406.82

Tax included. Shipping calculated at checkout.

Anodized hub milled from a whole piece
Maximum weight saving compared to standard wheels
Maximum gain in handling and, at the same time, stability in challenging off-road situations
Anodized aluminum spoke nipples

Factory Graphics Kit

£144.08

Tax included. Shipping calculated at checkout.

Made of the highest quality materials
Visual highlight
Perfect fit
Personalize the look of your motorcycle
Race look
Designed to completely change the original look of your motorcycle
Glue the graphics kit directly onto the standard fairing parts
Can be removed without leaving any residue

Factory Racing Fuel Pump Connection

£44.44

Tax included. Shipping calculated at checkout.

Developed according to the requirements of our factory drivers
Allows tighter fuel hose routing along the engine
Prevents unintentional disconnection of the fuel hose in off-road applications

Factory Racing Triple Clamp

£497.42

Tax included. Shipping calculated at checkout.

Elegant anodized surface
Visual highlight
CNC milled aluminum triple clamp
Optimally tuned steering stem stiffness
100% alignment of the fork tubes
Ideal flexibility – precisely customized to the WP fork
Specially optimized geometry of the fork clamping
No ovalization of the fork outer tube
Highly precise and smooth fork response
Maximum handling gain
Gain in stability at the front wheel
Overall, more homogeneous force flows in the entire vehicle
Simple offset adjustment
Including steering stem with steering head bearing already pressed on
Very simple offset adjustment of 20 or 22 mm
Shorter offset: Stability on fast straights
Longer offset: easier and quicker cornering in curves
For use on Enduro MY21 and later (EU Version), the Factory fuel tank cap vent is required

Factory Racing Triple Clamp

£497.42

Tax included. Shipping calculated at checkout.

Elegant anodized surface
Visual highlight
CNC milled aluminum triple clamp
Optimally tuned steering stem stiffness
100% alignment of the fork tubes
Ideal flexibility – precisely customized to the WP fork
Specially optimized geometry of the fork clamping
No ovalization of the fork outer tube
Highly precise and smooth fork response
Maximum handling gain
Gain in stability at the front wheel
Overall, more homogeneous force flows in the entire vehicle
Simple offset adjustment
Including steering stem with steering head bearing already pressed on
Very simple offset adjustment of 20 or 22 mm
Shorter offset: Stability on fast straights
Longer offset: easier and quicker cornering in curves
For use on Enduro MY21 and later (EU Version), the Factory fuel tank cap vent is required

Factory Rear Wheel 2.15 x 18''

£497.42

Tax included. Shipping calculated at checkout.

Anodized hub milled from a whole piece
Maximum weight saving compared to standard wheels
Maximum gain in handling and, at the same time, stability in challenging off-road situations
Anodized aluminum spoke nipples

Factory Rear Wheel 2.15 x 19''

£497.42

Tax included. Shipping calculated at checkout.

Anodized hub milled from a whole piece
Maximum weight saving compared to standard wheels
Maximum gain in handling and, at the same time, stability in challenging off-road situations
Anodized aluminum spoke nipples

Factory Wheel Bearing Protection Cap Set

£27.13

Tax included. Shipping calculated at checkout.

Optimal protection against penetration of mud, sand and water into the wheel bearing of your wheel
Reduces wear on sealing rings and wheel bearings for longer service life

Incl. special low friction shaft sealing rings

Feeler Gauge

£18.07

Tax included. Shipping calculated at checkout.

100 mm length
20 blades: 0,05 - 0,1 - 0,15 - 0,2 - 0,25 - 0,3- 0,35 - 0,4 - 0,45 - 0,5 - 0,55 - 0,6 - 0,65 - 0,7 - 0,75 - 0,8 - 0,85 - 0,9 - 0,95 - 1,0 mm

Flame Brake Disc

£89.70

Tax included. Shipping calculated at checkout.

No fading
Outer ring made of stainless high-performance brake steel
Minimal wear on brake pads
Significantly longer lasting
With Flame design for added braking performance

FMF Factory Fatty Expansion Chamber

£270.92

Tax included. Shipping calculated at checkout.

Untreated surface
Extra strong sheet steel
Wide, even engine speed range
Higher speed
More traction
Better gas control
Uncompromising race look

FMF Fatty Expansion Chamber

£316.25

Tax included. Shipping calculated at checkout.

Extra strong sheet steel
Nickel-plated surface
Wide, even engine speed range
Higher speed
More traction
Better gas control

FMF Titan Powercore 2.1 Silencer

£452.15

Tax included. Shipping calculated at checkout.

Easy to mount
Perfect fit
Extremely low weight
Titanium silencer cap
Rich sound
Low noise level
Silencer housing made of high-grade titanium
Blue anodized outer sleeve

Frame Protection Set

£31.67

Tax included. Shipping calculated at checkout.

Prevents abrasion of the frame by dirt, falls or the driver's boots
Protects trousers and boots from burns on the exhaust side

GPS Bracket

£58.92

Tax included. Shipping calculated at checkout.

Suitable for all Garmin GPS devices
Suitable for all TomTom GPS devices
Suitable for the Touratech iBracket
Mounting on the standard handlebar clamps

HINSON Inner Clutch Hub

£361.51

Tax included. Shipping calculated at checkout.

CNC milled from high-strength aluminium
Improves heat dissipation
Improves clutch performance and durability
Hinson-typical surface treatment for significantly improved robustness compared to the standard part
Very clean running of the clutch, which leads to reduced heat development when the clutch is pulled
Can be installed in the standard clutch or in combination with other Hinson clutch components

Hourmeter Bracket

£12.61

Tax included. Shipping calculated at checkout.

To assemble the hour counter on the triple clamp

Ignition Curve Switch

£93.01

Tax included. Shipping calculated at checkout.

Ignition curve adjustment made easy
Comfortable ignition curve adjustment on the handlebar

Kick Starter Kit

£270.92

Tax included. Shipping calculated at checkout.

All parts required to install the kick-starter system on your motorcycle
Combination of kick and electric starter system > maximum starting safety

Radiator Fan

£135.01

Tax included. Shipping calculated at checkout.

Plug & Play mounting
Provides more air
Better cooling
Maximum performance

Radiator Fan

£261.86

Tax included. Shipping calculated at checkout.

Provides better cooling of the engine
Provides more air
Maximum performance
Digital control
Current temperature can be read at any time
Variable switch-on temperature between 65 °C and 95 °C
Switch-off temperature 1 °C below the selected switch-on temperature

Radiator Protection

£44.44

Tax included. Shipping calculated at checkout.

Easy to mount
Optimal protection against stone impact
Provides maximum protection at the lowest possible weight
Including adapted radiator protection grills

Radiator Protection Sleeve

£34.38

Tax included. Shipping calculated at checkout.

For extremely muddy conditions
Protects the radiator from mud, dirt and sand
Protection against rapid overheating of the engine in muddy conditions

Rear Brake Conversion Kit

£89.70

Tax included. Shipping calculated at checkout.

Allows the rear wheel to be braked with the left hand
Provides additional control in critical riding situations
For use with the automatic clutch

Rekluse EXP 3.0 Centrifugal Force Clutch Kit

£769.30

Tax included. Shipping calculated at checkout.

Tested in the toughest conditions
Installed in the standard clutch, which means simple, uncomplicated and fast installation
Unlimited and total concentration on the perfect line
New generation of Rekluse centrifugal clutch with EXP technology
Easily adjustable from the outside via the clutch slave cylinder
No stalling of the engine in critical situations, such as braking, downhill runs, jumping, or when starting or pushing
Improved traction, controllable by the throttle alone
Slippery, extremely steep sections can be managed more easily > saves time and ensures faster lap times
More relaxed, fatigue-free and controlled riding, even over longer distances and in tough terrain
No more coupling is required, although it is still possible
Special rear brake conversion kit available, allowing braking of the rear wheel with the left hand

Reservoir

£36.20

Tax included. Shipping calculated at checkout.

Coolant reservoir for overheated radiators
To be installed in the frame breast pipe

Seat

£135.01

Tax included. Shipping calculated at checkout.

Lower compared to the standard seat
Resistant coating
Enables shorter drivers to also achieve the optimum seat height

Sign up to the Lings GASGAS Newsletter now!