MC250 2026

There's racing experience here as well!

Practical tyre lever set, consisting of

3 x short version 51012092100

3 x long version 51012093100

There's racing experience here as well!

Practical tire iron - short version ideal for the portable tool bag

There's racing experience here as well!

Practical tire iron - long version for minimum effort

Small and light, so very portable - saves the day in the event of a puncture on the move!

Mini-foot pump with pressure gauge on the swivelling valve head that fits all prevalent valves

Integrated double-cylinder with pressure switch-over to high pressure

Maximum 12 bar

Height: approx. 170 mm folded together

Makes setting the sag significantly simpler

Folding version for easy stowing in the tool box

Convenient and easy to use

Made of the highest quality materials

The quick-lock coupling remains on the air fork

Ideal when using the quick lock kit with multiple motorcycles

With scaling for both the fluid level and different mixture ratios

Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister

Simple handling thanks to the ergonomic design

The ideal tool for checking perfect wheel position when tensioning the chain.

Testing, charging and keeping batteries fresh

Fully automatic and economical battery charging by means of programmed charge characteristic

Short-circuit protection

Reverse polarity protection

Can be used for several types of batteries (Pb, LiFePo4)

Charging with constant power, or with a specific power control program

Trickle charge during diagnostic or flashing the vehicle

Recovery mode for low battery voltage (BMS, battery management system)

Optimizes battery performance and service life

Precise battery monitoring

Including power supply cable type UK

100 mm length

20 blades: 0,05 - 0,1 - 0,15 - 0,2 - 0,25 - 0,3- 0,35 - 0,4 - 0,45 - 0,5 - 0,55 - 0,6 - 0,65 - 0,7 - 0,75 - 0,8 - 0,85 - 0,9 - 0,95 - 1,0 mm

High-quality, adjustable torque wrench 5-25 NM, including the following accessories:-

Push-on spoke wrenches in sizes 5.65 and 6.95mm

Push-on ratchet ¼"

Ratchet attachments: 6, 8, 10mm socket wrench, 15 Torx

On this spoke wrench, the torque is preset at 6 Nm.

This prevents over-tightening of the spoke nipples.

Too much torque when tightening the spoke nipples is the most frequent cause of broken spokes.

Wrench size 6.8 mm.

Patented gage for two important checks

Check and adjust chain tension

Check chain lengthening (wear)

Practical companion for national and international trips

Convenient and easy to use

Extremely low weight

7,4 V air compressor

Maximum air pressure: 7,59 bar / 110 PSI / 759 kPa

Power: 7,4 V; 6 A; 44,4 Watt

Maximum duration: 15 Minuten (enough to re-fill both tyres)

Integrated lithium-Ion battery with 7,4 V, 2.200 mAh

Hose and adapters can be stored inside the housing

Charging with USB-C-connection

Dimensions: 131 x 80 x 40 mm

Weight: 0,33 kg

This mat is already mandatory for many races

The special material mix absorbs overflowing fuel

The mat also facilitates the retrieval of tools, screws and other small parts during service work

Complies with FIM regulations

Rubberised back

Size: 200 cm x 100 cm

• Highest quality workmanship
• Including straps

Perfect for all on the move

Exceptionally robust

Can be used with XACT/ XPLOR forks and shocks

Dimensions L=44,09 inch / W=16,14 inch / H=6,30 inch

This mat is already mandatory for many races

The special material mix absorbs overflowing fuel

The mat also facilitates the retrieval of tools, screws and other small parts during service work

Complies with FIM regulations

Rubberised back

Size: 200cm x 100cm

Provides optimum protection

For rear sprockets up to 53T and 220 mm - 270 mm brake discs

• Stabilizes the motorcycle during transport
• After transport, the tool serves as a perfect plug-in stand!

Robust, solid construction

Modern and simple design

Easy to mount

New bike stand generation

Plastic - aluminium combined for highest stiffness

Extremely stable due to a broad stand design

Height: 43 cm

Top plate in 2k injection moulding technology

Side plates for graphics mounting

Use either the supplied, or your own graphics

Robust, solid construction

Modern and simple design

Easy to mount

New bike stand generation

Plastic - aluminium combined for highest stiffness

Extremely stable due to a broad stand design

Height: 43 cm

Top plate in 2k injection moulding technology

Side plates for graphics mounting

Use either the supplied, or your own graphics

TAIL SECTION

START NUMBER PLATE

START NUMBER PLATE

START NUMBER PLATE

AIR FILTER BOX FRONT PART

AIR FILTER BOX FRONT PART

AIR FILTER BOX FRONT PART

AIR FILTER PANEL

AIR FILTER PANEL

SPOILER SET

FENDER

FENDER

FENDER