Technical Accessories

Makes removal of the front wheel easier

For all front axles with a diameter of 22 mm

PHDS bracket for factory steering damper

Factory steering damper bracket

Upgrade your bike with this factory handlebar and make use of the advantages of an adjustable crossbar, depending on the track ground:

When locked, the crossbar is solid (stiff)

When unlocked, the crossbar is flexible

Dimensions: A = 112 mm, B = 811 mm, C = 88 mm

Made of high-strength aluminium

Elegant anodized surface

Pure race feeling

Provides more traction when starting

Mounted directly on the fork

Very easy operation

Extremely low weight

Fast preload adjustment

Use of the entire length of the thread on the shock absorber

Dirt-resistance

Mechanical drive

For all 48 mm forks

Ideal protection for sealing the fork

For use with an open fork protector

There's racing experience here as well!

Practical tire iron - short version ideal for the portable tool bag

There's racing experience here as well!

Practical tire iron - long version for minimum effort

• Protects the radiator hose in case of a hit to the front wheel during full steering angle

• Optimal protection against penetration of mud, sand and water into the wheel bearing of your wheel
• Reduces wear on sealing rings and wheel bearings for longer service life

• Optimal protection against penetration of mud, sand and water into the wheel bearing of your wheel
• Reduces wear on sealing rings and wheel bearings for longer service life

• All parts required to install the kick-starter system on your motorcycle
• Combination of kick and electric starter system > maximum starting safety

• Two handlebars in one
• The exterior ensures maximum resistance to external damage (e.g. fall)
• Additionally hard anodized against corrosion
• The interior, made of a special alloy, is also hard anodized to protect it from damage by the handlebar controls.
• Nylon inserts in the inner tube allow thinner walls
• Very good flex properties
• Comes with handlebar pad
• Dimensions: A = 118 mm, B = 811 mm, C = 74 mm

• Coolant reservoir for overheated radiators
• To be installed in the frame breast pipe

• Made of the highest quality materials
• Tested in the toughest conditions
• Developed together with the vehicle
• Perfect compromise between maximum chassis performance and lowest possible vehicle height
• No restrictions on riding dynamics
• Enables shorter drivers to also achieve the optimum seat height

• 80 % lighter than steel with the same load-bearing capacity
• Elegant look
• Low thermal expansion
• Made of high-quality carbon
• High long-term temperature stability
• Non-corrosive
• Maximum protection against falls, flying stones, branches, etc.
• Can only be fitted with a standard header
• High stiffness and strength

• Extra strong sheet steel
• Nickel-plated surface
• Wide, even engine speed range
• Higher speed
• More traction
• Better gas control

• Untreated surface
• Extra strong sheet steel
• Wide, even engine speed range
• Higher speed
• More traction
• Better gas control
• Uncompromising race look

• Easy to mount
• Perfect fit
• Extremely low weight
• Titanium silencer cap
• Rich sound
• Low noise level
• Silencer housing made of high-grade titanium
• Blue anodized outer sleeve

• Easy to mount
• Perfect fit
• Silencer housing made of high-grade aluminium
• Rich sound
• Low noise level
• Specially developed for use in motocross
• Reduced weight

• Significantly more torque
• Significantly more performance
• Extremely durable
• Factory Racing Team look
• Made from high grade titanium
• Permanently welded brackets
• Profiled surface of the outer sleeve
• Embossed Akrapovič logo
• Significantly longer durability
• Complies with FIM regulations

• Prevents dust and dirt from entering the tank when the fuel tank cap is opened
• Filter is attached directly to the tank opening
• Fits all 3/4 fuel tank caps

• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Protects your expensive smartphone from rain, dust or mud
• Touchscreen remains fully functional
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Contents are in accordance with DIN standard 13167-2014 for motorcyclists
• Note: It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain)

Use highly recommended when washing the bike thoroughly; in other words, when the fuel tank is removed

Prevents water from entering the fuel line

• Contains all the most-used bolts and small parts for current Offroad models
• 30 % saving compared with purchasing individual parts

• 100 mm length
• 20 blades: 0,05 - 0,1 - 0,15 - 0,2 - 0,25 - 0,3- 0,35 - 0,4 - 0,45 - 0,5 - 0,55 - 0,6 - 0,65 - 0,7 - 0,75 - 0,8 - 0,85 - 0,9 - 0,95 - 1,0 mm