Technical Accessories

Manufactured using state-of-the-art 2-component injection moulding technology

Extremely light

Protects the brake disc from stones and other solid obstacles

Central adapter replaces the spacer sleeve on the wheel axle

Allows tyre changes, brake service etc. without removing the brake cover

Noble material mix of carbon fibre and plastic

Up to 260mm brake disc

Stabilises the motorcycle during transport

Protects the fork shaft sealing rings and fork springs against damage due to tension belts being tightened too much

Is clamped between the bottom of the front fender and tyre

Keeps water out of the silencer during cleaning

For inner-diameter of 22-42 mm

• Convenient and easy to use
• Easy handling and operation
• Comfortable unhooking of springs

Chain breaker

• Enables power consumers such as grip heater or radiator fans to be installed on SX or XC as well

• Recommended for long journeys
• Significantly longer durability
• Teeth made of high-strength steel, for an extra long service life
• Extremely low-wear

• Significantly longer lasting
• Very high friction coefficient for maximum and permanent braking force
• Very good braking effect even in wet conditions
• For extreme operating conditions (sand, gravel...)
• Eliminates “fading” almost completely

Visual highlight

Changes the handling of the motorcycle

Gain in stability therefore recommended for fast tracks

Plug & Play mounting

Attachment to handlebar

Highest quality workmanship

With exchangeable chain track surface, therefore extremely durable

Specially designed for the challenges of off-road use

High stiffness and strength

80 % lighter than steel with the same load-bearing capacity

Elegant look

Low thermal expansion

Made of high-quality carbon

High long-term temperature stability

Non-corrosive

Maximum protection against falls, flying stones, branches, etc.

Can only be fitted with a standard header

Extra strong sheet steel

Nickel-plated surface

Full sound

Better power delivery

Extra strong sheet steel

Untreated surface

Full sound

Better power delivery

Silencer housing made of high-grade titanium

Blue anodised outer sleeve

Rich sound

Low noise level

Easy to mount

Perfect fit

Extremely low weight

Testing, charging and keeping batteries fresh

Fully automatic and economical battery charging by means of programmed charge characteristic

Short-circuit protection

Reverse polarity protection

Can be used for several types of batteries (Pb, LiFePo4)

Charging with constant power, or with a specific power control program

Trickle charge during diagnostic or flashing the vehicle

Recovery mode for low battery voltage (BMS, battery management system)

Optimizes battery performance and service life

Precise battery monitoring

Including power supply cable type UK

100 mm length

20 blades: 0,05 - 0,1 - 0,15 - 0,2 - 0,25 - 0,3- 0,35 - 0,4 - 0,45 - 0,5 - 0,55 - 0,6 - 0,65 - 0,7 - 0,75 - 0,8 - 0,85 - 0,9 - 0,95 - 1,0 mm

Original fairing parts, without the standard decor

Optimal basis for creating a unique design

Perfect fit

Personalise the look of your motorcycle

Kit contains:

Fork protector kit

Fender

Start number plate

Spoiler set

Air filter cover

Air filter panel

Tail section

All parts packed in a box

Elegant cover

Maximum grip with unrestricted freedom of movement

For standard height seats

Elegant cover

Resistant coating

Plenty of freedom of movement and yet perfect hold

The “Wave surface” has the effect of a gradation

Same seat height like the standard seat

For all 48 mm forks

Ideal protection for sealing the fork

For use with an open fork protector

Resistant to the toughest stresses and strains

Ideal protection for sealing the fork

Mounted directly on the fork

Recommended in extremely wet conditions.

Acts as an additional protective layer

Washable

The steel piston ring, which is also installed in the WP Pro components shock absorbers, improves the service life of the piston and reduces the friction.

Which effects the response of the shock absorber positive.

Can be easily replaced when the shock absorber is serviced.

For piston diameter 50mm.

No fading

Outer ring made of stainless high-performance brake steel

Minimal wear on brake pads

Significantly longer lasting

With Flame design for added braking performance

Floating

Inner ring anodised

Outer ring made of stainless high-performance brake steel

Minimal wear on brake pads

With exchangeable chain track surface, therefore extremely durable

Developed for use on the toughest off-road terrain

Developed according to the requirements of our factory drivers

Visual highlight

Race look

Streamlined profile with increased coverage of swing arm mounting tabs.

Large chamfered outside leading and bottom edges for maximum rock deflection.

Friction reducing additives and UV protection to eliminate colour fade. 

Protects from damage in the event of a fall

Easy to mount

Protects the fork

For all 48 mm forks

Ideal protection for sealing the fork

For use with an open fork protector

Know exactly when the next service is due

Including rev counter

High stiffness and strength

Made of high-quality carbon

Optimal protection against stone impact

Visual highlight

Optimal protection against stone impact

Makes setting the sag significantly simpler

Folding version for easy stowing in the tool box