Technical Accessories

There's racing experience here as well!

Practical tire iron - long version for minimum effort

Developed together with the vehicle

Specially developed for WP forks

Fork bleeding using finger pressure

• Two handlebars in one
• The exterior ensures maximum resistance to external damage (e.g. fall)
• Additionally hard anodized against corrosion
• The interior, made of a special alloy, is also hard anodized to protect it from damage by the handlebar controls.
• Nylon inserts in the inner tube allow thinner walls
• Very good flex properties
• Comes with handlebar pad
• Dimensions: A = 118 mm, B = 811 mm, C = 74 mm

Front fender

Right hand air filter cover

Air filter cover

Fork protector kit

Start number plate

• Prevents abrasion of the frame by dirt, falls or the driver's boots
• Protects trousers and boots from burns on the exhaust side

• Significantly more torque
• Significantly more performance
• 105 Factory kit with more displacement (105 instead of 85)

• Extends the filter service intervals
• Recommended for extremely dusty conditions
• Washable

• Specially developed for use in motocross
• No O- or Z-rings > minimum loss of power and good durability

• Easy to mount
• Perfect fit
• Silencer housing made of high-grade aluminum
• Stainless steel silencer cap
• Rich sound
• Low noise level
• Permanently welded brackets
• Specially developed for use in motocross
• Reduced weight

• Extra strong sheet steel
• Nickel-plated surface
• Wide, even engine speed range
• Higher speed
• More traction
• Better gas control

• Extremely robust spark plug
• Center electrode tip made of iridium
• Reinforced ground electrode (against vibration and breakage)
• Special design with improved anti-sooting characteristic
• Recommended in combination with factory cylinder heads, factor exhaust systems or factory digital box

• Convenient and easy to use
• Very easy operation
• Adjusting the air pressure

• Contents are in accordance with DIN standard 13167-2014 for motorcyclists
• Note: It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain)

• Contains all the most-used bolts and small parts for current Offroad models
• 30 % saving compared with purchasing individual parts

• 100 mm length
• 20 blades: 0,05 - 0,1 - 0,15 - 0,2 - 0,25 - 0,3- 0,35 - 0,4 - 0,45 - 0,5 - 0,55 - 0,6 - 0,65 - 0,7 - 0,75 - 0,8 - 0,85 - 0,9 - 0,95 - 1,0 mm

• Convenient and easy to use
• Very easy operation

• Already mandatory in many competitions
• Complies with FIM regulations
• Rubberized back

• Highest quality workmanship
• Including straps

Recommended for storing your timecard during races

Stick it directly to the seat with grip glue

• For extremely muddy conditions
• Protects the radiator from mud, dirt and sand
• Protection against rapid overheating of the engine in muddy conditions

Medium strength thread lock - contents, 50 ml

• Temperature resistant from -55 to +200 °C
• Fills gaps up to 0.25 mm
• Final strength achieved after 1 to 3 hours

The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature

Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid

Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes

At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes

The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease

Contents: 56 g

• Recommended for extremely dusty conditions