Technical Accessories

• Plug & Play mounting
• Provides more air
• Better cooling
• Maximum performance

• Protects from damage in the event of a fall
• Permanent protection against unattractive scratches and matte spots on the swingarm

• Specially developed for extreme conditions
• Strap made from high-strength nylon
• Makes it easier to stand your motorcycle up

• Elegant anodized surface
• Visual highlight
• CNC milled aluminum triple clamp
• Optimally tuned steering stem stiffness
• 100% alignment of the fork tubes
• Ideal flexibility – precisely customized to the WP fork
• Specially optimized geometry of the fork clamping
• No ovalization of the fork outer tube
• Highly precise and smooth fork response
• Maximum handling gain
• Gain in stability at the front wheel
• Overall, more homogeneous force flows in the entire vehicle
• Simple offset adjustment
• Including steering stem with steering head bearing already pressed on
• Very simple offset adjustment of 20 or 22 mm
• Shorter offset: Stability on fast straights
• Longer offset: easier and quicker cornering in curves
• For use on Enduro MY21 and later (EU Version), the Factory fuel tank cap vent is required

• Made of the highest quality materials
• Visual highlight
• Perfect fit
• Personalize the look of your motorcycle
• Race look
• Designed to completely change the original look of your motorcycle
• Glue the graphics kit directly onto the standard fairing parts
• Can be removed without leaving any residue

• Lower compared to the standard seat
• Resistant coating
• Enables shorter drivers to also achieve the optimum seat height

• Easy to mount
• Optimal protection against stone impact
• Provides maximum protection at the lowest possible weight
• Including adapted radiator protection grills

• Endurance-tested for the toughest off-road applications
• Easy to mount
• Extremely durable
• Made of high-strength aluminium
• Highest quality workmanship
• Custom design
• Most effective protection for frame and engine
• Decoupled from the frame by rubber pads
• Extremely resistant fastening system
• Side parts welded from inside and out

Thickness 4 mm

• Optimal protection against penetration of mud, sand and water into the wheel bearing of your wheel
• Reduces wear on sealing rings and wheel bearings for longer service life

• Optimal protection against penetration of mud, sand and water into the wheel bearing of your wheel
• Reduces wear on sealing rings and wheel bearings for longer service life

• All parts required to install the kick-starter system on your motorcycle
• Combination of kick and electric starter system > maximum starting safety

• Ignition curve adjustment made easy
• Comfortable ignition curve adjustment on the handlebar

• Coolant reservoir for overheated radiators
• To be installed in the frame breast pipe

• 80 % lighter than steel with the same load-bearing capacity
• Elegant look
• Low thermal expansion
• Made of high-quality carbon
• High long-term temperature stability
• Non-corrosive
• Maximum protection against falls, flying stones, branches, etc.
• Can only be fitted with a standard header
• High stiffness and strength

• Extra strong sheet steel
• Nickel-plated surface
• Wide, even engine speed range
• Higher speed
• More traction
• Better gas control

• Untreated surface
• Extra strong sheet steel
• Wide, even engine speed range
• Higher speed
• More traction
• Better gas control
• Uncompromising race look

• Easy to mount
• Perfect fit
• Extremely low weight
• Titanium silencer cap
• Rich sound
• Low noise level
• Silencer housing made of high-grade titanium
• Blue anodized outer sleeve

• Significantly more torque
• Significantly more performance
• Extremely durable
• Factory Racing Team look
• Made from high grade titanium
• Permanently welded brackets
• Profiled surface of the outer sleeve
• Embossed Akrapovič logo
• Significantly longer durability
• Complies with FIM regulations

• Easy to mount
• Developed for use on the toughest off-road terrain
• Maximum protection at the lowest possible weight
• Custom design
• Manufactured using state-of-the-art 2-component injection molding technology
• Made from special, high-strength plastic
• Decoupled from the frame by rubber pads
• Mounting directly on the frame

• Universal and inconspicuous bracket for your smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Protects your expensive smartphone from rain, dust or mud
• Touchscreen remains fully functional
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• 100 mm length
• 20 blades: 0,05 - 0,1 - 0,15 - 0,2 - 0,25 - 0,3- 0,35 - 0,4 - 0,45 - 0,5 - 0,55 - 0,6 - 0,65 - 0,7 - 0,75 - 0,8 - 0,85 - 0,9 - 0,95 - 1,0 mm

• Developed according to the requirements of our factory drivers
• Allows tighter fuel hose routing along the engine
• Prevents unintentional disconnection of the fuel hose in off-road applications

• Easy to mount
• Protects from damage in the event of a fall

• Easy to mount
• Protects from damage in the event of a fall

• Prevents abrasion of the frame by dirt, falls or the driver's boots
• Protects trousers and boots from burns on the exhaust side

• Anodized hub milled from a whole piece
• Maximum weight saving compared to standard wheels
• Maximum gain in handling and, at the same time, stability in challenging off-road situations
• Anodized aluminum spoke nipples

• Acts as an additional protective layer
• Recommended for extremely dusty conditions
• Premature sanding of the air filter is avoided
• Coarse-pored air filter cover

Steering damper bracket

Steering damper counter bearing

• For extremely muddy conditions
• Protects the radiator from mud, dirt and sand
• Protection against rapid overheating of the engine in muddy conditions

• Provides better cooling of the engine
• Provides more air
• Maximum performance
• Digital control
• Current temperature can be read at any time
• Variable switch-on temperature between 65 °C and 95 °C
• Switch-off temperature 1 °C below the selected switch-on temperature