Technical Accessories

Use this to remove the dirt from your last mud battle with ease!

A motorcycle grip rubber (not included) can be fitted to the grip

Keeps water out of the silencer during cleaning

For inner-diameter of 22-42 mm

Stabilises the motorcycle during transport

Protects the fork shaft sealing rings and fork springs against damage due to tension belts being tightened too much

Is clamped between the bottom of the front fender and tyre

Protects the intake system against water and dirt when cleaning the air filter box

Protects the intake system against water and dirt when cleaning the air filter box

To prevent the ingress of water in the silencer when cleaning

Kit contains all required covers for a thoroughly cleaning process of the bike:

Air filter cover

Plug

Wash cap set

Plug-in stand and fork support in one part

Two tools in one

Saves space when transporting your motorcycle

Stabilises the motorcycle during transport

Protects the fork shaft sealing rings and fork springs against damage due to tension belts being tightened too much

After transport, the tool serves as a perfect plug-in stand!

Makes removal of the front wheel easier

For all front axles with a diameter of 22 mm

This clever tool is a must for every motorcycle toolbox

With it, you can remove dirt from your fork seals effortlessly

No matter whether it's in the garage or directly at the racetrack this tool extends the life of your seals many times over

For all 48 mm forks

• Convenient and easy to use
• Easy handling and operation
• Comfortable unhooking of springs

Chain breaker

All parts to convert your bike compatible with the new FIM 109 dB noise regulation

The kit contains

Special air box inserts which will be mounted in the airbox

Special air filter support

Pre oiled dual layer air filter

Silencer with a special noise reduction insert

Special motormapping required

To install the silencer, the stock mounting parts must be overtaken

Protects the intake system against water and dirt when cleaning the air filter box

Protects the intake system against water and dirt when cleaning the air filter box

Patented gage for two important checks

Check and adjust chain tension

Check chain lengthening (wear)

Provides optimum protection

For rear sprockets up to 53T and 220 mm - 270 mm brake discs

This mat is already mandatory for many races

The special material mix absorbs overflowing fuel

The mat also facilitates the retrieval of tools, screws and other small parts during service work

Complies with FIM regulations

Rubberised back

Size: 200cm x 100cm

High-quality, adjustable torque wrench 5-25 NM, including the following accessories:-

Push-on spoke wrenches in sizes 5.65 and 6.95mm

Push-on ratchet ¼"

Ratchet attachments: 6, 8, 10mm socket wrench, 15 Torx

This mat is already mandatory for many races

The special material mix absorbs overflowing fuel

The mat also facilitates the retrieval of tools, screws and other small parts during service work

Complies with FIM regulations

Rubberised back

Size: 200 cm x 100 cm

On this spoke wrench, the torque is preset at 6 Nm.

This prevents over-tightening of the spoke nipples.

Too much torque when tightening the spoke nipples is the most frequent cause of broken spokes.

Wrench size 6.8 mm.

Secure stand for your bike

Made especially for 50 / 65 / 85 models

Aluminium construction with a non-slip pad.

The top is wedge shaped and solid so the bike doesn't slide around when washing.

Testing, charging and keeping batteries fresh

Fully automatic and economical battery charging by means of programmed charge characteristic

Short-circuit protection

Reverse polarity protection

Can be used for several types of batteries (Pb, LiFePo4)

Charging with constant power, or with a specific power control program

Trickle charge during diagnostic or flashing the vehicle

Recovery mode for low battery voltage (BMS, battery management system)

Optimizes battery performance and service life

Precise battery monitoring

Including power supply cable type UK

100 mm length

20 blades: 0,05 - 0,1 - 0,15 - 0,2 - 0,25 - 0,3- 0,35 - 0,4 - 0,45 - 0,5 - 0,55 - 0,6 - 0,65 - 0,7 - 0,75 - 0,8 - 0,85 - 0,9 - 0,95 - 1,0 mm

Makes setting the sag significantly simpler

Folding version for easy stowing in the tool box

250 ml refill bottle of green Scottoil for the scottoiler kit (enough oil to cover up to 8.000 km)

The green Scottoil is made for all climates and biodegradable

Secure stand for your bike

Made of high-strength aluminium

Predefined predetermined breaking point

Predefined predetermined breaking point

Tool for lifting the motorcycle at the rear axle

Support adapters are clamped into the rear wheel lifting device

Secure stand for your bike

Support adapters are clamped into the rear wheel lifting device

Practical help when loading the bike or jacking up with the rear wheel lifting device

Support adapters are clamped into the rear wheel lifting device

Tool for lifting the motorcycle at the rear axle