Technical Accessories

Prevents abrasion of the frame by dirt, falls or the driver's boots

Protects trousers and boots from burns on the exhaust side

Acts as an additional protective layer

Recommended for extremely dusty conditions

Premature sanding of the air filter is avoided

Coarse-pored air filter cover

Washable

CNC milled handlebar mount with damping rubber inserts

Gentle on wrists and shoulder joints

Damping of hard shocks

Absorption of chassis and engine vibrations

Additional handlebar damping in horizontal direction

Optimum steering precision

Handlebar height adjustable to 2 positions

Provides maximum protection at the lowest possible weight

Optimal protection against stone impact

Easy to mount

Provides maximum protection at the lowest possible weight

Optimal protection against stone impact

Easy to mount

CNC milled aluminium triple clamp

Elegant anodised surface

Visual highlight

Optimally tuned steering stem stiffness

100% alignment of the fork tubes

Ideal flexibility – precisely customised to the WP fork

Specially optimised geometry of the fork clamping

No ovalization of the fork outer tube

Highly precise and smooth fork response

Maximum handling gain

Gain in stability at the front wheel

Overall, more homogeneous force flows in the entire vehicle

Simple offset adjustment

Including steering stem with steering head bearing already pressed on

Very simple offset adjustment of 20 or 22 mm

Shorter offset: Stability on fast straights

Longer offset: easier and quicker cornering in curves

Protects the brake disc in the event of a fall

High stiffness and strength

Protects the rear brake disc from stones and other solid obstacles

CNC milled from high-strength aluminium

Lighter than series components

Improved braking performance

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight with technical and ergonomic added value

Adjustable grip width

Suitable for all hydraulic Braktec clutch mountings.

Elegant cover

Seat cover with transversely stitched ribs

Maximum grip with unrestricted freedom of movement

For standard height seats

Pre-cut stickers

Suitable for front and rear wheel rim

For wheel size 18/21"; 19/21"

Resistant to the toughest stresses and strains

Forged lightening indents reduce rotational mass

Grooves between the teeth clear dirt under the chain

Extends chain life

This clever tool is a must for every motorcycle toolbox

With it, you can remove dirt from your fork seals effortlessly

No matter whether it's in the garage or directly at the racetrack this tool extends the life of your seals many times over

For all 48 mm forks

Uncompromising race look

Extremely light

Open design 2-component plastic handguard

Black middle section = maximum strength for optimum protection

Coloured top and bottom parts = highly flexible under the roughest conditions

Attached with a special bracket on the handlebar

Manufactured using state-of-the-art 2-component injection moulding technology

Extremely light

Protects the brake disc from stones and other solid obstacles

Central adapter replaces the spacer sleeve on the wheel axle

Allows tyre changes, brake service etc. without removing the brake cover

Noble material mix of carbon fibre and plastic

Up to 260mm brake disc

Stabilises the motorcycle during transport

Protects the fork shaft sealing rings and fork springs against damage due to tension belts being tightened too much

Is clamped between the bottom of the front fender and tyre

Keeps water out of the silencer during cleaning

For inner-diameter of 22-42 mm

• CNC milled from high-strength aluminium
• Elegant anodized surface
• Visual highlight

Wider contact surface than standard:

• + 8 mm for 125/150 SX/XC-W, SX-F, 450/500 EXC-F
• +16 mm for 250/300 SX/EXC, 250/350 EXC-F

• Convenient and easy to use
• Easy handling and operation
• Comfortable unhooking of springs

Chain breaker

• Enables power consumers such as grip heater or radiator fans to be installed on SX or XC as well

• Recommended for long journeys
• Significantly longer durability
• Teeth made of high-strength steel, for an extra long service life
• Extremely low-wear

• Significantly longer lasting
• Very high friction coefficient for maximum and permanent braking force
• Very good braking effect even in wet conditions
• For extreme operating conditions (sand, gravel...)
• Eliminates “fading” almost completely

Stainless steel outer sleeve and interior

Can only be fitted with a standard header

Full sound

Uncompromising race look

Hard Enduro-compatible durability

Complies with current FIM noise regulations

Better power delivery

Sensitive response

Practical companion for national and international trips

Convenient and easy to use

Extremely low weight

7,4 V air compressor

Maximum air pressure: 7,59 bar / 110 PSI / 759 kPa

Power: 7,4 V; 6 A; 44,4 Watt

Maximum duration: 15 Minuten (enough to re-fill both tyres)

Integrated lithium-Ion battery with 7,4 V, 2.200 mAh

Hose and adapters can be stored inside the housing

Charging with USB-C-connection

Dimensions: 131 x 80 x 40 mm

Weight: 0,33 kg

Elegant cover

Seat cover with transversely stitched ribs

Maximum grip with unrestricted freedom of movement

For standard height seats

Patented gage for two important checks

Check and adjust chain tension

Check chain lengthening (wear)

Perfect fit

Provides optimum protection

For rear sprockets up to 53T and 220 mm - 270 mm brake discs

Fast and easy inductive charging of the smartphone during the ride

Can be mounted on the SPC+ smartphone bracket and smartphone adapter

Including USB-A charging cable

This mat is already mandatory for many races

The special material mix absorbs overflowing fuel

The mat also facilitates the retrieval of tools, screws and other small parts during service work

Complies with FIM regulations

Rubberised back

Size: 200cm x 100cm