Technical Accessories

Stainless steel outer sleeve and interior

Can only be fitted with a standard header

Full sound

Uncompromising race look

Hard Enduro-compatible durability

Complies with current FIM noise regulations

Better power delivery

Sensitive response

Practical companion for national and international trips

Convenient and easy to use

Extremely low weight

7,4 V air compressor

Maximum air pressure: 7,59 bar / 110 PSI / 759 kPa

Power: 7,4 V; 6 A; 44,4 Watt

Maximum duration: 15 Minuten (enough to re-fill both tyres)

Integrated lithium-Ion battery with 7,4 V, 2.200 mAh

Hose and adapters can be stored inside the housing

Charging with USB-C-connection

Dimensions: 131 x 80 x 40 mm

Weight: 0,33 kg

Elegant cover

Seat cover with transversely stitched ribs

Maximum grip with unrestricted freedom of movement

For standard height seats

Patented gage for two important checks

Check and adjust chain tension

Check chain lengthening (wear)

Perfect fit

Provides optimum protection

For rear sprockets up to 53T and 220 mm - 270 mm brake discs

Fast and easy inductive charging of the smartphone during the ride

Can be mounted on the SPC+ smartphone bracket and smartphone adapter

Including USB-A charging cable

This mat is already mandatory for many races

The special material mix absorbs overflowing fuel

The mat also facilitates the retrieval of tools, screws and other small parts during service work

Complies with FIM regulations

Rubberised back

Size: 200cm x 100cm

Silencer housing made of high-grade titanium

Carbon silencer cap

Mounting also possible with original header

Significantly more torque

Substantial weight saving

Noticeable performance enhancement

Blue anodised outer sleeve

In connection with an FMF Megabomb header even further increase in rideability and power output can be achieved

Installed in the standard clutch, which means simple, uncomplicated and fast installation

Unlimited and total concentration on the perfect line

New generation of Rekluse centrifugal clutch with EXP technology

Easily adjustable from the outside via the clutch slave cylinder

No stalling of the engine in critical situations, such as braking, downhill runs, jumping, or when starting or pushing

Improved traction, controllable by the throttle alone

Slippery, extremely steep sections can be managed more easily > saves time and ensures faster lap times

More relaxed, fatigue-free and controlled riding, even over longer distances and in tough terrain

No more coupling is required, although it is still possible

Special rear brake conversion kit available, allowing braking of the rear wheel with the left hand

Tested in the toughest conditions

Uncompromising race look

Extremely light

Open design

Attached directly at the levers with a special mounting

Only mountable with Braktec system

Right grip permanently glued to the throttle grip

Left grip with aluminium clamping ring for fixing on the handlebar

Inconvenient gluing and securing with wire no longer necessary

The different guide plates allow a variation of the throttle valve opening

Right grip permanently glued to the throttle grip

Left grip with aluminium clamping ring for fixing on the handlebar

Inconvenient gluing and securing with wire no longer necessary

The different guide plates allow a variation of the throttle valve opening

Right grip permanently glued to the throttle grip

Left grip with aluminium clamping ring for fixing on the handlebar

Inconvenient gluing and securing with wire no longer necessary

The different guide plates allow a variation of the throttle valve opening

Right grip permanently glued to the throttle grip

Left grip with aluminium clamping ring for fixing on the handlebar

Inconvenient gluing and securing with wire no longer necessary

The different guide plates allow a variation of the throttle valve opening

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Robust, solid construction

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Robust, solid construction

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Robust, solid construction

Floating

Outer ring made of stainless high-performance brake steel

Minimal wear on brake pads

With Flame design for added braking performance

Custom designed seat for an uncompromising look

Resistant coating

Seat cover with transversely stitched ribs

Maximum grip with unrestricted freedom of movement

Same seat height like the standard seat

High-quality, adjustable torque wrench 5-25 NM, including the following accessories:-

Push-on spoke wrenches in sizes 5.65 and 6.95mm

Push-on ratchet ¼"

Ratchet attachments: 6, 8, 10mm socket wrench, 15 Torx

This mat is already mandatory for many races

The special material mix absorbs overflowing fuel

The mat also facilitates the retrieval of tools, screws and other small parts during service work

Complies with FIM regulations

Rubberised back

Size: 200 cm x 100 cm

Easily accessible and within the rider's field of vision

Fast and easy inductive charging of the smartphone during the ride

Can be mounted on the SPC+ smartphone bracket and smartphone adapter

Including USB-C charging cable

Teeth made of high-strength steel, for an extra long service life

Aluminium centre section, reduces unsprung masses

Permanently joined together with high-strength rivets

At least three times longer service life than other aluminium rear sprockets

50 % lighter than steel rear sprockets

Longer service life of the entire drivetrain kit

Endurance-tested for the toughest off-road applications

Easy to mount

Extremely light

Extremely durable

Highest quality workmanship

Noble material mix of carbon fibre and plastic

Most effective protection for frame and engine

Manufactured using state-of-the-art 2-component injection moulding technology

Resistant coating

Seat cover with transversely stitched ribs

Maximum grip with unrestricted freedom of movement

Same seat height like the standard seat

Custom designed seat for an uncompromising look

Secure stand for your bike

Made especially for 50 / 65 / 85 models

Aluminium construction with a non-slip pad.

The top is wedge shaped and solid so the bike doesn't slide around when washing.

Optimal protection against penetration of mud, sand and water into the wheel bearing of your wheel

Reduces wear on sealing rings and wheel bearings for longer service life

Incl. special low friction shaft sealing ring

Provides more air

Maximum performance

Digital control

Current temperature can be read at any time

Variable switch-on temperature between 65 °C and 95 °C

Switch-off temperature 1 °C below the selected switch-on temperature

Provides better cooling of the engine